Shenzhen Fable Jewellery Technology Co., Ltd.
Shenzhen Fable Jewellery Technology Co., Ltd. We are making it better！
Add to Cart
Lapidary Machine with Wheel Index of 96 and 64 and the Shaping Faceter
Model number: FJM-2014A
The gem lapidary machine is used for gem facet processing and grinding samples for mineral separation. Fable Faceting machine has a compact structure and reasonable coordination. It has the advantages of stable operation, good heat dissipation and low noise under high-speed operation.
Product Parameters
| Model | FJM-2014A |
| Input Voltage | AC220V,50/60HZ |
| Moter Power | 170-180W |
| Speed of Moter | 1350r/min |
| Speed of Mainshaft | 2300-2800r/min |
| Diameter of the disk | 150mm |
| Angle Range | 1-90 degree |
| Size of Machine | 600*300*380mm |
| With vernier scale,accuracy | 0.1mm |
| Index wheel | 96 and 64 |
Product Description
Gemological Lapidary Machine with Faceting and Polishing Functions with High Precision.
Product Application
gemology, gem/jewellry manufacturing industry, jewellery technology school, etc.
Product Accessories
1.One Bucket
2.One Shaping holder
3.One Faceting holder
4.One Polishing and Faceting disk,Diameter:150mm
5.With Power switch
6.automatic control button
7.Foot controller
8.One cable connector
9.10 pieces of dop stick
10.One set of stander
Operation Methods
There are ways to operate the machine by automatic and foot control.
1. Foot control. First turn on the machine's power switch, and then step on the foot switch, so that the grinding disc will begin to rotate for gem processing.When shutting down, raise the foot switch first, and then turn off the power switch.
2. Automatic control. Turn on the power switch first, and then turn on the automatic switch, the machine starts to automatic working. When closing,turn off the automatic switch at first,and then turn off the power switch.
Applications:
gemology, gem/jewellry manufacturing industry, jewellery technology school.
